- Thread Starter Thread Starter
- #21
Now, it’s cutting compound angled tenons
Brink’s world tour Y1.7k
- Thread starter Brink
- Start date
- Thread Starter Thread Starter
- #22
And cutting mortises in 2” thick oak
- Thread Starter Thread Starter
- #23
Three legs fitted
- Thread Starter Thread Starter
- #25
Four legs fitted
- Thread Starter Thread Starter
- #26
Cutting the tenons on the stretchers
- Thread Starter Thread Starter
- #27
And chopping out the mortises in the legs
Brink, you belong in Silver Dollar City, or at least what I remember of it 40 years ago......!!
- Thread Starter Thread Starter
- #29
The mortise and tenoned stretchers are being draw bored and pegged.
No glue. The offset in the two holes draws the pieces tight. If any part needs replacement in the future, the pegs can simply be driven out.
No glue. The offset in the two holes draws the pieces tight. If any part needs replacement in the future, the pegs can simply be driven out.
- Thread Starter Thread Starter
- #30
I needed a good 2x6 for stretchers, only had this old 2x8
- Thread Starter Thread Starter
- #31
Hug those lines
- Thread Starter Thread Starter
- #32
Almost finished!
Just need to flatten the top, and drill dog holes
Just need to flatten the top, and drill dog holes
Nice work, Brink. I like the design. I may have to borrow some elements for an upcoming small workbench build. Especially the knockdown and splayed legs - would be perfect for this bench since it will get moved to the basement when done and will eventually need to be removed from the basement.
- Thread Starter Thread Starter
- #34
No need for vises
