♫ εηdεd ♫ Possible trade with Pinky

manbuckwal

Member
Full Member
Messages
8,703
Reaction score
10,742
Location
Western US (California)
First name
Tom
@pinky asked if I had a Claro bowl blank . Rough cut taper 4 1/2 - 5 1/4 and just shy of 12" square . Has 1 1/2" long check on the darker face . It has some Burl in it and from the end grain you can see it will have some nice color variations as you get into it. Let me know.


image.webp image.webp image.webp image.webp image.webp image.webp
 
  • Thread Starter Thread Starter
  • #5
Here's the other piece any I took pic of check it has almost center on one end . First two pics are front n back the next two are the sides

image.webp image.webp image.webp image.webp image.webp
 
Here is the piece I would cut from. It measures 20 x 16 x 10. It is dry. I have had this 8 -10 years. You can still see the chain saw marks but you should be able to see what it is about. IMG_2040.webp IMG_2041.webp IMG_2042.webp
 
@manbuckwal
Cut a piece off the face of the burl. Will pretty much fill a mfrb. Not the cleanest cut off the bandsaw. Need to spend 20 minutes cleaning the pitch build up from cutting wet wood. Should be able to see what you would be getting. Let me know if you likey. IMG_2043.webp
 
Last edited:
Back
Top