Looking for all types of the veneer.
Looking For Veneer
- Thread starter Stan Mckinnon
- Start date
I have some- paul has a bunch
Had. I gave it all to Mark Peet @Mr. Peet who seems to sell it only occasionally because he's busy with other things (also, he plans to use a lot of it in his wood stove to heat his house).
I will try to picture some
What sizes?
@Mike1950 you laugh, but I wasn't kidding.
Oh I believe it. Still funny.
- Thread Starter Thread Starter
- #9
Ideally 14” plus in length
Ah! You may be a little short on @Mr. Peet stash. As I recall, he has mainly pieces the size of sheet paper.
If he still has any, @tocws2002 has sold a bit in the past.
I recall a purchase in the past that had some purdy veneers.
If he still has any, @tocws2002 has sold a bit in the past.
I recall a purchase in the past that had some purdy veneers.
Last edited:
Thanks for the tag. Ya, all I have is shorts, nothing in the 14 and over.
all I probably have is figured
I have a few.
Curly Makore
Birdseye Maple
I have a lot of each that is 24" in length. I have Makore in longer lengths but it gets difficult to ship in really long lengths. Width on the Makore range from around 5" to 10" or so. The Birdseye is 5-9" wide. I also have fumed Eucalyptus, flame Birch, Larch, rolls of Cherry, and a bit of Elm and Walnut. These are all 32 or 42 thickness. I also have 1/16 in quartered White Oak, Walnut, Curly Maple, and rift White Oak.
Curly Makore
Birdseye Maple
I have a lot of each that is 24" in length. I have Makore in longer lengths but it gets difficult to ship in really long lengths. Width on the Makore range from around 5" to 10" or so. The Birdseye is 5-9" wide. I also have fumed Eucalyptus, flame Birch, Larch, rolls of Cherry, and a bit of Elm and Walnut. These are all 32 or 42 thickness. I also have 1/16 in quartered White Oak, Walnut, Curly Maple, and rift White Oak.
That Curly Makore is gorgeous!
Just now seeing this thread. I do have a fair amount of veneer in various species. Anything in particular you are looking for? Most of what I have is still in long sheets (8' or so), that I can roll and ship, so you can cut to your specifications. If you are just looking for a variety, I can put a box together for you and post here with pics and pricing.
Thanks,
-jason
Thanks,
-jason
I have a bunch of irregulars but would fit your length requirement. If no luck above, let me know.