Small amount of Mahogany

whitewaterjay

Member
Full Member
Messages
348
Reaction score
454
Location
NE Ohio
First name
Jason
Looking for a small bit of mahogany to repair this antique feathered mahogany drop leaf work table. I think it's from the late 1800s and is worth the effort to repair where this drop leaf attaches. I'd also be interested in some figured feathered mahogany veneer to possibly repair a missing section on a drawer front.

Thanks!

PXL_20240103_011625180.webp

PXL_20240103_011640380.webp
 
  • Thread Starter Thread Starter
  • #10
Thanks for the responses guys!

For the 3/4" repair pieces just plain mahogany will work, for the Veneer piece I'd need it to be figured/feathered.
 
Oh, good, you can post up pictures and see if you can sell it for some "mad money". I'm prepping for this coming storm.
No way. That stuff is all yours now. I don't want anything to do with it. That's why I (effectively) GAVE it to you :smile:
 
If you need longer, i think i still have a few neck blanks from Martin or Gibson Guitar. If so, they are about 2" x 3" x 23"+. Might also have some 3/4" x 3" or so--about the same length. Neck blanks are pretty plain, the 3/4" i have/had has a little figure--nothing like the front of that piece, not even close!!
 
Back
Top