2 grand pianos. tone wood?

vegas urban lumber

Member
Full Member
Messages
4,203
Reaction score
6,823
Location
las vegas
First name
trev
so two untunable grand pianos are up for $100 at my local school district
any idea about usable wood in them when dismantled?
1791403199276.webp
 
I have thought about salvaging free pianos on Craigslist, but the ones I have seen are veneer and utility woods. But the hardware in them is kinda cool. The high quality ones use ebony for the black keys, real old ones had ivory laminated on the tops of the white keys...
 
I have salvaged a few pianos for lumber stock. The decorative panels sold well for bench backs and such like. The sound board is a sound board so if you could get a luthiers attention, it would work regardless what it is. Sometimes that utility wood in the older furniture is American chestnut. Anything newer than about 1960 is pretty much guaranteed to be poplar or soft maple if it was made here in the states.
 
  • Thread Starter Thread Starter
  • #11
based on the baldwin serial number made in 1987

according to google

Your Baldwin piano was made in 1987. [1]
The character "L" indicates the specific model of the piano—in this case, it is a Baldwin Model L grand piano, a highly regarded artist-series instrument measuring 6'3" in length and manufactured in the United States.
 
Never heard of untunable. Heard of lazy and no longer want. Remember to turn the strings down. I started to dismantle one and it let loose. The sound board holds back a lot. Harp exploded. So scrapped most of it. Only nice wood I found was loaded with hardware.
 
My guitar coach buys old pianos because many of them have Brazilian rosewood veneers. He has plans to use the larger flat pieces to make a dining room table. The carved legs are usually more common woods like poplars and ash but stained to match the rosewood. The sound boards and frame are usually hard maple. Older pianos have actual ivory on the white keys and the black keys are ebony.
 
Last edited:
Back
Top