Another mystery wood...

chatometry

Member
Full Member
Messages
421
Reaction score
578
Location
Italy
First name
Paolo
Hello again
For this one I know absolutely nothing, except that it's not a very expensive wood. It looks fairly chatoyant, with evident but not very large flecks (beech-sized, I'd say). Flecks are visible in picture 3 below.
My first thought was Meranti, and Bilbo's pictures look similar to mine, but I'd be happy to hear your opinion as I am quite unexperienced on this task...
Thanks again!
Paolo
IMG20220122171604.jpg

IMG_20220122_174517.jpg
IMG_20220122_174532.jpg
IMG_20220122_174545.jpg
 

barry richardson

Moderator
Staff member
Global Moderator
Full Member
Messages
10,282
Reaction score
16,766
Location
Buckeye AZ
First name
Barry
I have some Keruing/apitong that looks very similar, both the end grain and q-sawn face.....
 

chatometry

Member
Full Member
Messages
421
Reaction score
578
Location
Italy
First name
Paolo
  • Thread Starter Thread Starter
  • #3
I forgot to mention density = 36 lb/ft3.

So this is my endgrain (1/4"x1/4"):
my endgrain 2.jpg

This is Meranti from the Hobbithouse (again cropped to 1/4"x1/4"):
meranti 1 detail.jpg
meranti 5 detail.jpg

This is Keruing from the Hobbithouse (again cropped to 1/4"x1/4"):
keruing 8 detail.jpg
keruing 4 detail.jpg
keruing 3 detail.jpg

It seems to me that my piece lacks the rays which are visible on Meranti and Keruing... :ponder:
 

Mr. Peet

Member
Full Member
Messages
7,279
Reaction score
7,921
Location
northeastern PA
First name
Mark
Hello again
For this one I know absolutely nothing, except that it's not a very expensive wood. It looks fairly chatoyant, with evident but not very large flecks (beech-sized, I'd say). Flecks are visible in picture 3 below.
My first thought was Meranti, and Bilbo's pictures look similar to mine, but I'd be happy to hear your opinion as I am quite unexperienced on this task...
Thanks again!
Paolo
View attachment 221159

View attachment 221160
View attachment 221161
View attachment 221162
Shorea got a challenge there. Need more pictures please. Need to show us the side view of the wood in picture three. Thanks.
 

phinds

Moderator
Staff member
Global Moderator
Founding Member
Full Member
Forum Moderator
Messages
9,919
Reaction score
17,695
Location
Cortland, NY
First name
Paul
Paolo, "meranti" is a very untrustworthy name since it is used for many widely varying species in the genus Shorea. That doesn't mean your analysis is wrong, I'm just saying ...
 

chatometry

Member
Full Member
Messages
421
Reaction score
578
Location
Italy
First name
Paolo
  • Thread Starter Thread Starter
  • #7
These two pictures are from the same side, to show how chatoyant this is.
IMG20220123213111.jpg
IMG20220123213119.jpg

These are one each from the other three sides - I don't know if this is what you were looking for.

IMG20220123213127.jpg
IMG20220123213256.jpg IMG20220123213303.jpg
 

phinds

Moderator
Staff member
Global Moderator
Founding Member
Full Member
Forum Moderator
Messages
9,919
Reaction score
17,695
Location
Cortland, NY
First name
Paul
Oh, and the weight is very consistent with the lighter Shorea species. The only meranti I've ever bought in good-sized plank form was much heavier but was also much darker in color.
 

chatometry

Member
Full Member
Messages
421
Reaction score
578
Location
Italy
First name
Paolo
  • Thread Starter Thread Starter
  • #9
Paolo, "meranti" is a very untrustworthy name since it is used for many widely varying species in the genus Shorea.
Thanks. I read about this on your website.
I was planning to put all shorea togerher in one group and then split it if I get enough samples from each of the "varieties" (white, yellow, etc).
So, even just identifying this as shorea would be very helpful.
Paolo
 

phinds

Moderator
Staff member
Global Moderator
Founding Member
Full Member
Forum Moderator
Messages
9,919
Reaction score
17,695
Location
Cortland, NY
First name
Paul
Definitely could be a Shorea but I don't know how you would get positive confirmation other than an actual DNA test (which is very expensive)
 

chatometry

Member
Full Member
Messages
421
Reaction score
578
Location
Italy
First name
Paolo
  • Thread Starter Thread Starter
  • #11
Thank you. I will compare the smell to that of other confirmed shorea samples I have and see if it matches...
 

Mr. Peet

Member
Full Member
Messages
7,279
Reaction score
7,921
Location
northeastern PA
First name
Mark
Paolo,

Thank you. Your weight of 36 matches many Shorea species. Picture 2 of post #1 clearly shows faint vertical lines that are common in many Shoreas. These lines are often a shade of white and contain lots of LATEX. See if it breaks down to confirm latex.

Without these lines, and if the wood was heavier (40-45), the African wood Niangon, Tarrietia utilis, would have matched well (likewise for a few others in the Tarrietia genus)..
 

chatometry

Member
Full Member
Messages
421
Reaction score
578
Location
Italy
First name
Paolo
  • Thread Starter Thread Starter
  • #13
Thanks for the deep insight! Very interesting!
Do you mean these faint lines?

IMG20220124180318.jpg
IMG20220124180344.jpg
IMG20220124180306.jpg
 

phinds

Moderator
Staff member
Global Moderator
Founding Member
Full Member
Forum Moderator
Messages
9,919
Reaction score
17,695
Location
Cortland, NY
First name
Paul
Yep. Marginal parenchyma lines. Nice photography.
 

chatometry

Member
Full Member
Messages
421
Reaction score
578
Location
Italy
First name
Paolo
  • Thread Starter Thread Starter
  • #16
Thanks Mark and Paul.
I did not even notice them before!
Cool!
Paolo
 

chatometry

Member
Full Member
Messages
421
Reaction score
578
Location
Italy
First name
Paolo
  • Thread Starter Thread Starter
  • #18
Mh... Just my phone on a box pointing at the wood piece. My phone is not the one show in the picture, it's a Realme GT. (and it does automatic white balance very badly...)

IMG20220125101736.jpg
 
Top