<Closed/Shipped/SOLD>Salmon Pink Ivory 4/4 Plank with figuring

Arn213

craM de la craM # RipJack City!
Full Member
Messages
4,686
Reaction score
9,461
Location
Knickerbocker, NY
First name
Arn
I was looking to get a neck build and really wanting a pink ivory neck, so I was looking though to see if I can dig one up to use. I found this unique piece and I was going to pack this up as it is the only one I have found in this color way that I had slated for 2 individual guitar fretboards. It is unusual color way for pink ivory as it has salmon pink hues in it and it has some tiger curl (the side edge is figured). If you saw this in person, you would have mistaken it for Brazilian pernambuco, but it is not and this is 100% South African Pink Ivory. You can easily yield 16 or conservatively 12 pen blanks. This is fairly clean for pink ivory with the exception of seasoned drying checks that are broken and not continuous- the one closes to the end grain is 7/16” deep and 2” long. I’ve stabilized it and drop filled with thin cyano. There is also 3-1/2” of partial sapwood at the one end. There is a layer of fine Anchorseal on this plank to ward off humidity. But, plenty of pen blanks with the quantity I listed above that you can keep some and trade some.

This is old and seasoned stock. Flat sawn cut. Rough surfaced planed. Dimensions are approximately 24.75” x 3.25” x .915” thick- snipe at end 2.75” affected length (.825” thickness at this area). Air dried/kiln dried currently at 11% mc. Physical weight is about 2.66 pounds. Yes it is hard, dense and heavy about 5 pounds per board foot.

Price is $ 125 + shipped weight of 4 pounds.





DCA0C38C-95A6-452C-A0F3-01591E96D8D0.jpeg

FA5E3830-286D-4951-8946-212DA9CAE6D9.jpeg

F44C7AAB-3D9C-4336-B6CE-2B7BA8ADCBBF.jpeg



12D34F9A-5BE7-418F-9388-6CBA94C64AF1.jpeg

73A9050F-D859-4F38-9BAE-9126FE9EE60B.jpeg

C64FDF67-0D1B-47A6-98D2-FF6924C9E3E9.jpeg

488C0847-C17D-49DB-B077-AF0D122FB675.jpeg

5CC02A01-A55B-4E55-904A-41A1A9E666B3.webp
 
Last edited:
I was looking to get a neck build and really wanting a pink ivory neck, so I was looking though to see if I can dig one up to use. I found this unique piece and I was going to pack this up as it is the only one I have found in this color way that I had slated for 2 individual guitar fretboards. It is unusual color way for pink ivory as it has salmon pink hues in it and it has some tiger curl (the side edge is figured). If you saw this in person, you would have mistaken it for Brazilian pernambuco, but it is not and this is 100% South African Pink Ivory. You can easily yield 16 or conservatively 12 pen blanks. This is fairly clean for pink ivory with the exception of seasoned drying checks that are broken and not continuous- the one closes to the end grain is 7/16” deep and 2” long. I’ve stabilized it and drop filled with thin cyano. There is also 3-1/2” of partial sapwood at the one end. There is a layer of fine Anchorseal on this plank to ward off humidity. But, plenty of pen blanks with the quantity I listed above that you can keep some and trade some.

This is old and seasoned stock. Flat sawn cut. Rough surfaced planed. Dimensions are approximately 24.75” x 3.25” x .915” thick- snipe at end 2.75” affected length (.825” thickness at this area). Air dried/kiln dried currently at 11% mc. Physical weight is about 2.66 pounds. Yes it is hard, dense and heavy about 5 pounds per board foot.

Price is $ 125 + shipped weight of 4 pounds.





View attachment 243054

View attachment 243055

View attachment 243056



View attachment 243058

View attachment 243059

View attachment 243060

View attachment 243061

View attachment 243073
i've cut a fair amount of eucalyptus that looks just like that
 
  • Thread Starter Thread Starter
  • #9
Too bad it's not 4" wide
Cut a piece about 7/8” and glue it up and you will have over 4” :wink::lol2:……….sorry I couldn’t help it Eric @Eric Rorabaugh as it was a side joke we had going back to the “Bearclaw maple” thread that you have. Kidding aside, I am staring at another piece about 6-1/2” I have that I am trying to see if I can actually can get a neck(s) out of, but it is riddle with defects + it is the red pink ivory heartwood version. What are your minimums?
 
  • Thread Starter Thread Starter
  • #11
i've cut a fair amount of eucalyptus that looks just like that
Yup, I actually have had figured eucalyptus, but from Hawaii- color way is about the same, it is also hard and dense, but not as dense as pink ivory probably a 1 pound per board foot difference and this one is not orange, orange. Closer to salmon pink with some peach thing intermixed- color theory when pink and orange gets mixed, you get kind of that peach color.
 
Let Tony have it all. I need to get rid of wood instead of getting more. It would make a good laminated call though
 
Last edited:
  • Thread Starter Thread Starter
  • #13
Let Tony have it all. I need to get rudnof wood instead of getting more. It would make a good laminated call though
What size and how does a lamination ends up looking like for your own use? Book-matching a 2” thick piece that is 2” plus wide? Or as I mentioned sticking a narrower piece to complete the 4” width. I am more interested what actual thickness you need. I have a 6-1/2” piece and a 3.5” wide piece- watermelon red though nothing with this salmon-pink color way.

I was told by my luthier friend not to long ago as I am collaborating possible build with him using pink ivory as neck material. I was aware that a single fretboard that is 1/4” thick runs about $ 100 a pop- that is plain and without any curl. I was shock when he told me it was closer to $ 200 per fretboard blank if you can find it! You should get 2 out of this if you want to go that route.
 
Last edited:
  • Thread Starter Thread Starter
  • #14
How about $ 125 shipped in the US only?
 
Last edited:
  • Thread Starter Thread Starter
  • #16
Ah, so easily ebony and pink ivory would work together as a color combination and both tonally are bright and snappy (ebony more). It would change the tone slightly if African Blackwood was added to the equation with the pink ivory. I don’t know how these would translate tone wise on pot calls compare to guitar components- probably similar. I proposed a pink ivory neck shaft with bois de rose fretboard……..
 
  • Thread Starter Thread Starter
  • #18
@Steelart99 this shipped yesterday, pm sent with tracking.

*Edit: payment received June 16, 2023.
 
Last edited:
Back
Top