(ENDED) ISO dry soft maple or cherry bowl blanks

Buckeyepen

Buckeyepen

Member
Full Member
Messages
98
Reaction score
206
Location
Akron, Oh
First name
Brent
I am in search of a couple bowl blanks 12x3 in soft maple or cherry. I need them to be dry as I don’t have time to rough turn and need minimal movement when done. Curl figure would be great but not necessary, it can be square just trying to get a finish size blank of 12 by 2.75 to 3 inch without wasting a lot of wood. Let me know what you have.

thanks

Brent
 
I may have some cherry but ni curl. Have to look tomorrow if I have time. Have another load of gravel coming and need to get it spread and some stumps grubbed before I get rid of the skid steer.
 
I need to look tonight, but I’m pretty sure I got a 12x12x3 cherry blank that is dry. It might be slightly larger actually. I might have something in maple too, but not as sure on that one.
 
I've got a piece of Cherry that is 12"x12"x2.5" if you are still in need. Cut 10/22. The outside is in the 9% range, I didn't dig deeper for the inside measurement.

I turned a bowl from a 4-5 inch thick piece if the same 6 months ago with no real movement after turning.
 
Last edited:
I got another one that is 13x16x3.5 I need to dig out.

if you could get by with about 11.5” in diameter I got more cherry, and maple that you might be able to use.
 
  • Thread Starter Thread Starter
  • #14
Sorry for delay in posting but my phone ended up in a lake on the 4th so wasnt able to log in here. I was in a rush for the customer so ended up talking them into a blank that I already had. I will be closing this, I appreciate everyones help on this.
 
You must log in or register to reply here.
Back
Top