**ENDED** Sale or Trade FBE Bowl Blanks

[Kevin]

I have 3 or 4 more bowl blanks just like these. These two are starting their trek to Norway today, but if anyone is interested I will take some pics of the others. I'll sell these or trade for other succulent wood. :nyam2:

I also have a bevy of 3 x 3 pepper mill blanks and some 4 x 4s also. And a few 2 x 2 left over after cutting a flute blank order. So any interest in those and I can post up some pics also.

These blanks are going to produce a couple of live edge portions across from each other on the rim but that what she wanted. The rest of the blanks will not have as much wane, and two of them none at all. They're 12²" x 5.5". These are sopping wet which makes them a pleasure to turn. I had to cut the corners to get them below the 20lb weight limit for USPS Priority international shipping; the only affordable way to ship small orders like this.

[attachment=1142]

[attachment=1143]


.

 

[kweinert]

I have an order for 12 bottle stoppers (me turning them, not just the wood.) Would any of your 2x2s have sufficient flame in them when cut to bottle stopper length?

To be honest I already have the wood on order for the client, but since she doesn't really care what wood I use I can always use what I've ordered for other purposes.

If you think they'd work, how much are you asking for them?

Thanks.

 

[Kevin]

Yes I have some that are killer. Each 2 x 2 x 12 is $7.50 I'll get some pics if the price is within your allowance for the project.

I've made bottle stoppers with them and they are stunning.

 

[kweinert]

Yes I have some that are killer. Each 2 x 2 x 12 is $7.50 I'll get some pics if the price is within your allowance for the project.

I've made bottle stoppers with them and they are stunning.

Yes, that's within the range I'm looking for and pictures would be nice. How many do you have available?

 

[Kevin]

How much eack Kevin 31558 St. Marys Ga with shipping

They'll go out tomorrow. When I print the labels you'll get a email from the USPS with tracking numbers. Thanks for fast payment.

 

[Vern Tator]

Hi Kevin, I am still interested in some 3x3 peppermill blanks. How much and how many have you got?
Thanks Vern

I have 3 or 4 more bowl blanks just like these. These two are starting their trek to Norway today, but if anyone is interested I will take some pics of the others. I'll sell these or trade for other succulent wood. :nyam2:

I also have a bevy of 3 x 3 pepper mill blanks and some 4 x 4s also. And a few 2 x 2 left over after cutting a flute blank order. So any interest in those and I can post up some pics also.

These blanks are going to produce a couple of live edge portions across from each other on the rim but that what she wanted. The rest of the blanks will not have as much wane, and two of them none at all. They're 12²" x 5.5". These are sopping wet which makes them a pleasure to turn. I had to cut the corners to get them below the 20lb weight limit for USPS Priority international shipping; the only affordable way to ship small orders like this.






.

 

[Kevin]

Hi Kevin, I am still interested in some 3x3 peppermill blanks. How much and how many have you got?

I'm getting low again. I have had a lot of buyers just off my other website since I fixed the image problems in the past few days. Every time I start rounding up what I have left and take a pic, get back to the computer to upload, I have an email or phone call with another order.

Hard to not sell them since I sell them for more money to non-Wood Barter customers. But I will not fill any more orders until I post a pic here of what I have left. I'm going to have to harvest another load in tomorrow or Sunday anyway. Try to get pics up in an hour or two . . . . or three . . . .

 

[txpaulie]

Hi Kevin, I am still interested in some 3x3 peppermill blanks. How much and how many have you got?

I'm getting low again. I have had a lot of buyers just off my other website since I fixed the image problems in the past few days. Every time I start rounding up what I have left and take a pic, get back to the computer to upload, I have an email or phone call with another order.

Hard to not sell them since I sell them for more money to non-Wood Barter customers. But I will not fill any more orders until I post a pic here of what I have left. I'm going to have to harvest another load in tomorrow or Sunday anyway. Try to get pics up in an hour or two . . . . or three . . . .

Hey Kev,
Add me to the list of stopper sized pieces wanted...
Just a handful will work if'n yer short...
Prolly shoulda mentioned this BEFORE you sent the cookies!:fool3:

p

 

[The PenSmith]

Email inbound on prices for the FBE 3x3's

Great looking wood !

 

[Marshall]

Hi Keven,
I'd be interested in 2 bottle stopper and 2 pepper mill blanks. Also, if you have any bowl blanks in the under 10" diameter size I would like 2 of those also.
Thanks,

 

[Kevin]

I have an order for 12 bottle stoppers (me turning them, not just the wood.) Would any of your 2x2s have sufficient flame in them when cut to bottle stopper length?

How do these four up front look?
[attachment=1239]

Same four flipped over front-to-back . . . .
[attachment=1238]

The sides without showing as much flame, remember the other sides have it coming from from there. I doubt you could get a single blank without plenty of flame. If that happens, I'll send you 2-for-1 replacements on each one you weren't satisfied with and you can keep the ones you didn't like. :yes:

Hey Kev,
Add me to the list of stopper sized pieces wanted...
Just a handful will work if'n yer short...

I'll just send you a box you know I'll do ya right. Since you're so close I can send you a custom priority box without it costing much. Doesn't sound like you want a medium flat rate box full but the small flat rate is too thin for good size stopper blanks. Just let me know about how much you want and I'll get-r-done Monday.

Hi Kevin, I am still interested in some 3x3 peppermill blanks. How much and how many have you got?
Thanks Vern

I just cut some more will post pics tonight.

Email inbound on prices for the FBE 3x3's

Watch this thread.

... 2 bottle stopper and 2 pepper mill blanks. (2) bowl blanks in the under 10" diameter...

Hey there Marshall. How thick you want the bowl blanks?


.

 

[txpaulie]

I'll just send you a box you know I'll do ya right. Since you're so close I can send you a custom priority box without it costing much. Doesn't sound like you want a medium flat rate box full but the small flat rate is too thin for good size stopper blanks. Just let me know about how much you want and I'll get-r-done Monday.

Kev,
Whatever works for you...
Any box'll do me!
I don't believe I'll become too angry (pissed?:rofl2:) if I get too much of your stuff!

Thanks again for all your hard work providing fodder for me/us!

p

 

[cabomhn]

Hey there Kevin,

I was hoping to buy two 3x3x12" FBE pepper mill blanks from you and I was wondering if you had any and how much, and/or if you were going to have any more in the future! Thanks!

- Matt

 

[kweinert]

I have an order for 12 bottle stoppers (me turning them, not just the wood.) Would any of your 2x2s have sufficient flame in them when cut to bottle stopper length?

How do these four up front look?


Same four flipped over front-to-back . . . .


The sides without showing as much flame, remember the other sides have it coming from from there. I doubt you could get a single blank without plenty of flame. If that happens, I'll send you 2-for-1 replacements on each one you weren't satisfied with and you can keep the ones you didn't like. :yes:

.

Those 4 look great. Not sure what size box those fit in, but as I've mentioned, if you want to fill the other part with stuff I can cut down to pen blanks (so the wood doesn't bang around in shipping :) I'm good with that - just let me know how much to send you and how to send it.

Thank you very much.

 

[Kevin]

I started a new thread for the pepper mill blanks guys because I'm getting confused. No, that's not hard to do. :wacko1:

Ken, I'll get ya fixed up.


.

 

[Marshall]

Kevin,

The bowl blanks could be in the 4-6" range for depth.
Thanks