• New Woodbarter Hats Are Available!!! Scroll down on the main page to the Member Activities & Site Support, Then click on Wood Barter SCHWAG and go to the topics on hats by Woodtickgreg to order your hat. There's only a limited quanity, so don't wait to get yours.

**ended** v Tony Dowden's Treasures

Luckypenney

Member
Full Member
Messages
66
Reaction score
45
Location
Central valley, Calif. USA
First name
Carmen
Greetings penners!!

You guys are such a special breed in the already special turning school... Ok guys, I have roughly 600 or so brand new unopened woodcraft kits. Mostly pens, but there's I've cream scoops, screwdrivers, laser pointer s, "bracelet helpers" or roach clips, little pillboxes, the list let's goes on and on and on... My stepfather always went overboard, rip, do I literally have 6 fruit boxes FULL of kits.
I imagine this will be a learning process for me as far as picturing for you guys what I have (since sometimes I have no idea what I'm looking at) lol. I'm just hoping you guys do! ROFL

This is just my first "pull", if you will, five shoeboxes of... Stuff. I haven't located the bulk of my pen kits...yet. and I still need to showcase my lumber rack, so if you're interested, I suggest you follow m this thread, cause there WILL be more!

now, there are 9 sets of bushings that are unknown. Also, I pictured the labels, the bushings are sometimes obscured. Let me know, if there's interest, I can take close-ups, measurements, etc.

The pics aren't the greatest, as is the handwriting, sorry, but they give you an idea of the types conditions and amounts of said stuff. Tony (my dear departed stepdad) had a tendency to buy in bulk, and he loved gold, all kits are gold, sorry.

I imagine you guys don't have the room for all of the details I need to say, so, if you have a question about something, or the writing isn't legible enough, just ask, and we'll figure it out.

Also, throughout the pics, and I think the entire #5 and #8 picture, I have no clue what the item is, so I've added pink text balloons. Any help identifying would be AWESOME!
(So, as I go to post this... I find them, and more. Picture #11 is my next "pull" or load of pics.)

My pricing is suggested donation price, and tries to be 20%-30% lower than lowest used Google price. And I had mentioned 35% lower than woodcraft price, which I will still honor. Any reasonable offer will probably be taken. Beggars can't be choosers, somewhat.
SHIPPING: I'm in Central Valley, California, just outside Fresno. At this time, shipping is NOT included in the price, and will be the buyers responsibility. I ship USPS, and unless a large item, usually runs around $6-7. If it's a bushing, I'll spring for the stamp and put it in the mail. Otherwise, I'll need at least the shipping cost put in my pay pal account so I can ship it.
Thanks again SO MUCH for welcoming me so warmly. My life right now is so cold. I was beginng to lose sight of hope, for mankind and myself. It's comforting somehow knowing there's a network of good ol boys telling bad jokes and making sawdust all night in their shops making their vision real. And I mean that with the UTMOST respect, fellas, really.

Yours truly,
CARMEN

IMG_20170907_113635.jpg

IMG_20170907_113900.jpg

IMG_20170907_113901.jpg

IMG_20170907_114030.jpg

IMG_20170907_114206.jpg

IMG_20170907_114207.jpg

IMG_20170907_114304.jpg

IMG_20170907_114344.jpg

IMG_20170907_114512.jpg

IMG_20170907_114513.jpg
 
Last edited by a moderator:

ripjack13

ɹǝʇɹɐqpooʍ
Staff member
Administrator
Global Moderator
Full Member
Messages
31,769
Reaction score
39,908
Location
Connecticut
First name
Marc
I'm interested in the barrel trimmers and pizza cutter

pix # 6-2 & 4-3....
 
Last edited:

Tony

Hardwood Enthusiast
Staff member
Global Moderator
Full Member
Messages
21,063
Reaction score
28,449
Location
San Antonio, TX
First name
Tony
Carmen, what do you want for the Carter conversion kit pic 11-2 and the seam rippers in pic 11? Also the bracelet helpers. Tony
 
Last edited:

tb54

Member
Full Member
Messages
14
Reaction score
20
Location
Pennsylvania
First name
Terry
As I look closer (that translates to larger monitor) the majority of what I posted is bushings, not pen kits. Sorry, my bsd
 
Last edited:

Lou Currier

Member
Full Member
Messages
6,554
Reaction score
14,396
Location
South West Florida
First name
Lou
I would be interested in the Cole jaws in #8 and what would you want for items in #11? Also are there any graduate twist pen bushings? Item #PKGRADBU.
 

TimR

Sawdust Engineer
Full Member
Messages
6,221
Reaction score
10,584
Location
Lake Park, GA
First name
Tim
The pink arrow in 3-2 is a crushgrind peppermill mechanism. Would be interested in it and any others.
 

kweinert

Member
Full Member
Messages
2,658
Reaction score
4,096
Location
Thornton, CO
First name
Ken
How much are you asking for the Legacy? It's intriguing, not sure I can afford it though. Not sure I have room in the shop for it either but that's a different discussion :)
 

Tony

Hardwood Enthusiast
Staff member
Global Moderator
Full Member
Messages
21,063
Reaction score
28,449
Location
San Antonio, TX
First name
Tony
How much are you asking for the Legacy? It's intriguing, not sure I can afford it though. Not sure I have room in the shop for it either but that's a different discussion :)

Ken, just be like @ripjack13 and I, don't concern yourself with whether you have room or not!!! Tony
 

kweinert

Member
Full Member
Messages
2,658
Reaction score
4,096
Location
Thornton, CO
First name
Ken
Ken, just be like @ripjack13 and I, don't concern yourself with whether you have room or not!!! Tony

Room and time - just what I need, another toy to play with, add different kinds of projects, etc, etc, etc. Going to have to win that lottery so I can finally retire and have the time :)
 

Tony

Hardwood Enthusiast
Staff member
Global Moderator
Full Member
Messages
21,063
Reaction score
28,449
Location
San Antonio, TX
First name
Tony
Carmen, I also would be interested in the rubber plugs as shown in this pic.
downloadfile-17.jpg

And if there are any if the silver caps like on the salt shaker from @TimR post here:
downloadfile-15.jpg

I would be interested in those. Tony
 

ripjack13

ɹǝʇɹɐqpooʍ
Staff member
Administrator
Global Moderator
Full Member
Messages
31,769
Reaction score
39,908
Location
Connecticut
First name
Marc
Just so you guys know up front. Her data/internet connection is horrible. It may take her a bit to reply back here....
 

TimR

Sawdust Engineer
Full Member
Messages
6,221
Reaction score
10,584
Location
Lake Park, GA
First name
Tim
How much are you asking for the Legacy? It's intriguing, not sure I can afford it though. Not sure I have room in the shop for it either but that's a different discussion :)
Hey Ken, I was a little curious about what that Legacy model was...not that I need, I have a 1200. Here's something I found if you want to see what it might be, though the box isn't clear on it being a 500 or 600.
 

kweinert

Member
Full Member
Messages
2,658
Reaction score
4,096
Location
Thornton, CO
First name
Ken
Hey Ken, I was a little curious about what that Legacy model was...not that I need, I have a 1200. Here's something I found if you want to see what it might be, though the box isn't clear on it being a 500 or 600.

And it looks like maybe the rails aren't included? At least it was hard for me to tell from the description what exactly was included in the box.

Still intriguing :)
 

Luckypenney

Member
Full Member
Messages
66
Reaction score
45
Location
Central valley, Calif. USA
First name
Carmen
  • Thread Starter Thread Starter
  • #19
Hey fellas,
Y'all are awesome! Brought me to tears this morning, thank you.
I'll be on touch, having slight issues looking up items for pricing. If you can find the lowest Google used price under their shopping tab, or the woodcraft price for whatever items you're interested in, it would expedite things greatly. Or if you have a ballpark on what your willing to pay for multiple items, I'm at bat!

I guess I update here your requests?

Ripjack13, pizza cutter $12, and did you want ALL trimmers? He probably has at least one set and specialty ones?

Tony, $115 for the conversion kit, and did you want ALL the seam rippers and bracelet helpers? He bought packs of 5 kits at a time, and did you see those gallon Ziplocs CRAMMED with kits? Lemme know how many, k?

Tb54, be right with you

Against the grain (my favorite song!!), Did you want the big one or the little? I'm having trouble finding the actual item

Lou Currier, not sure if you and against the grain are vying for the same item, and like I said I'm having trouble locating item on internet. Be right with you on the bushing

TimR, $12 for the peppermill chingadera

Legacy Mill, yeah, I don't know either. Maybe later on I'll actually open the box and see what we're working with.

:lol2:(me this morning counting the responses)
I'll be back!
Thank you!!!!!:thanx2:
 

Karl_TN

Member
Full Member
Messages
2,327
Reaction score
3,619
Location
Rosemark TN
First name
Karl
Any idea what is the turning blank in the upper right of pic# 1? What is the size and how much do you want for this?

Are the bags in pic# 11-4 full of pen kits? If so then how many are there of each type and what is the price (each or lot)?

Last but not least, do you know what Nova DVR model your step father used? Know this might help others figure out the thread size (i.e. 1x8 or 1-1/8x8) for the chucks and faceplates in pic# 8.
 
Top