DavidGD
Member
I’ve been building things out of wood for 60 years, but only tried a lathe once over a decade ago. That was a first roughing of olive cut a week earlier from trees in my back yard, on their multi-year path to being bowls. That was at a friend’s house, and it was fun to be cutting spinning wet wood … when I found the right feel. I recently have had 2 projects on my own: the first was a handle for a bottle stopper for a friend, that would also hold his family heirloom silver napkin ring, the second is an in progress bowl. Both of these used wood that had been drying for 7 to 10 years in my shop. The bottle stopper was made of walnut burl, the bowl from an ash bowl-blank. The walnut started out as a 2.5 x 2.5 x10” rectangle. It had shrunk considerably and the edges were twisted in a spiral while the surfaces were bumpy where there were no clear knots. The ash is a cube I bought, and had cut into a cylinder 10 years ago and then I waxed it.
Both were mounted to the lathe the same way: thread a steel bolt (cut off head) into the wood mount bolt shaft into chuck. In both cases I took the blank down to what I thought was very close to round (I am a beginner!) and a good shape. In both cases when I returned the next day the items were not even sort-of close to round. I could believe that the walnut was relieving stress from its drastic shrinkage, once the exterior was removed. I’m having a harder time thinking that something that was a cylinder, and with not really all that much wood removed (still a solid center), would go out of round overnight for the same reason. The ash blank spent all of its time under the unused lathe, the walnut across the shop. So it seems odd to think it a humidity change.
Thoughts?
Thanks!
Both were mounted to the lathe the same way: thread a steel bolt (cut off head) into the wood mount bolt shaft into chuck. In both cases I took the blank down to what I thought was very close to round (I am a beginner!) and a good shape. In both cases when I returned the next day the items were not even sort-of close to round. I could believe that the walnut was relieving stress from its drastic shrinkage, once the exterior was removed. I’m having a harder time thinking that something that was a cylinder, and with not really all that much wood removed (still a solid center), would go out of round overnight for the same reason. The ash blank spent all of its time under the unused lathe, the walnut across the shop. So it seems odd to think it a humidity change.
Thoughts?
Thanks!