Pink ivory or something that looks like rose gold

I don't know which species of Palo Verde, but here is a bowl I finished. This was a rough out that I got from Jerry. The finish was tung oil, so some amber color is from that. The color in the pics is true to life and it is basically the same today, 3 years after finishing.

Tim, that is Mexican Blue, but it's been changed because of Political correctness. I don't remember the botanical name. (CRS setting in) . It could be the Florida pronounced flowreeda variety. ................. Nubs
 
I don't know which species of Palo Verde, but here is a bowl I finished. This was a rough out that I got from Jerry. The finish was tung oil, so some amber color is from that. The color in the pics is true to life and it is basically the same today, 3 years after finishing.

i think i've noticed that by the time it spalts some of the yellow has dissipated
 
Do you know which sorbus species you have? Mine is sorbus torminalis or aucuparia. They yellowed considerably after finishing. But as far as I know they never darkened to a more orange Color. They kept most of their pinkishness and and got a little yellow.
Ryan is talking about 'Pear', Pyrus genus, you are talking about another genus, Sorbus.
 
  • Thread Starter Thread Starter
  • #64
Got a pic?

EDIT: Waaaiiit are they the Boguscolorvendor from the hobbithouse wood name database?
Dry & wet

Top to bottom -
1-4: Pink ivory
5: Swiss pear with a little piece of arg. Osage on top
6: canarywood
7. Sappy redheart

I tried sanding the right 1/3 of the pear by hand to get to fresh lighter wood, but it wasn't enough.

Looking at the wet pieces, i now thinkn the pear might be too dark. Maybe for accent wood, but not for full feature wood.

20250930_212738.webp

20250930_212949.webp
 
I think that Osage also has a uniform yellow Color. (Sometimes) you could definitely find some on WB.

Did someone mention yellow wood?
I made some yellow dust Monday night using the chainsaw to get it down to chunks that i could run thru the bandsaw. That stuff was everywhere!

20250929_185018.jpg
 
Dry & wet

Top to bottom -
1-4: Pink ivory
5: Swiss pear with a little piece of arg. Osage on top
6: canarywood
7. Sappy redheart

I tried sanding the right 1/3 of the pear by hand to get to fresh lighter wood, but it wasn't enough.

Looking at the wet pieces, i now thinkn the pear might be too dark. Maybe for accent wood, but not for full feature wood.

View attachment 279351

View attachment 279352
That looks way to dark I think Mark is right. You have got some pear and not sorbus. But I can understand that buying more wood is no longer possible (space, money, wife, etc etc) at some point.
 
Last edited:
  • Thread Starter Thread Starter
  • #68
That looks way to dark I think Mark is right. You have got some pear and not surbus. But I can understand that buying more wood is no longer possible (space, money, wife, etc etc) at some point.
I never said it was Surbus (whatever that is lol). It was always swiss pear in my mind.
 
I never said it was Surbus (whatever that is lol). It was always swiss pear in my mind.
Swiss pear is in the sorbus genus. Which reveals the problem. I thought it was sorbus but it was sold to you as Swiss pear. So it might actually be a pyrus genus (pear) instead. Sorbus species don’t have commonly eaten fruit. They might be called mountain ash in America.
 
Swiss pear is in the sorbus genus. Which reveals the problem. I thought it was sorbus but it was sold to you as Swiss pear. So it might actually be a pyrus genus (pear) instead. Sorbus species don’t have commonly eaten fruit. They might be called mountain ash in America.
It has been covered on WoodBarter before, but I will repeat it. Swiss pear in the USA and western Hemisphere is known as Pyrus communis.

 
It has been covered on WoodBarter before, but I will repeat it. Swiss pear in the USA and western Hemisphere is known as Pyrus communis.

Thanks. I didn’t know that. After some very quick looking hearne hardwoods apparently has some Swiss pear from the sorbus genus. Maybe he’ll have some luck there.
 
  • Thread Starter Thread Starter
  • #72
I have no idea what the botanical name is for this "Swiss pear" from Cooks. I just know the common name used to market it. And i know it's relatively light weight and porous and darkens with age. Compared to the ornamental bradford pear from my own yard, this Swiss pear is lighter, more porous, and more uniform/bland in color and grain. The other fruit woods i have on hand might be similar in density and porosity to this Swiss pear, but it's difficult to say since i have yet to use them. I would guess this Swiss pear is close to black cherry, but black cherry is probably slightly more dense.

When i wet the woods in the photo above, the Swiss pear just drank up the water immediately and retained it for a while. In fact i was a little paranoid about warping, so i ended up wetting both sides then weighting it down flat on stickers to dry. And on a side note, i was surprised to discover that pink ivory absorbs water easily, considering it's density and oil content. It also stinks when it's wet lol
 
Thanks. I didn’t know that. After some very quick looking hearne hardwoods apparently has some Swiss pear from the sorbus genus. Maybe he’ll have some luck there.
I was at Hearnes all day Saturday. The only 'Swiss' pear I saw there was labeled Pyrus. They had some 'Rowan' as Sorbus.

 
I was at Hearnes all day Saturday. The only 'Swiss' pear I saw there was labeled Pyrus. They had some 'Rowan' as Sorbus.

Interesting. Rowan when steamed should have a subtle pink or fawn Color. How was hearnes? Sounds like it should be amazing to be there. Similar to cropps edelholzshop in Germany.
The pear wood (pyrus communis) I saw on the internet looks a lot like the pear I have seen so far but much redder. You could call up a lumber yard and ask for specific Color matching. I do this regularly and it works very well. Just ask for the pinkest wood they have.
 
Last edited:
it doesn't seem to be a particularly popular wood.
I can believe that. It is hard to dry without major cracking, regardless the pains you take with endgrain sealant. I have had best luck with dead, standing trees for turning stock. I haven’t been able to turn green without splits forming.
 
  • Thread Starter Thread Starter
  • #78
Definitely looks browner in person, but it's clearly still a yellow wood. Almost looks like a mix between canary and yellowheart. The smell is familiar, but i can't pinpoint it. This stuff definitely won't work for this project, but i planned to buy the wood before this project even came to fruition.

20251001_185726.webp

20251001_185639.webp

20251001_185516.webp

20251001_185541.webp
 
Interesting. Rowan when steamed should have a subtle pink or fawn Color. How was hearnes? Sounds like it should be amazing to be there. Similar to cropps edelholzshop in Germany.
The pear wood (pyrus communis) I saw on the internet looks a lot like the pear I have seen so far but much redder. You could call up a lumber yard and ask for specific Color matching. I do this regularly and it works very well. Just ask for the pinkest wood they have.
It was their annual Habitat for Humanity fund raiser. Lots of venders, lots of people and good conversation. They are building a new office. The handrail was 3.5" thick Black walnut, 38" wide by 22' long, single piece of wood. That is the teaser, the rest you will have to wait.
 
It was their annual Habitat for Humanity fund raiser. Lots of venders, lots of people and good conversation. They are building a new office. The handrail was 3.5" thick Black walnut, 38" wide by 22' long, single piece of wood. That is the teaser, the rest you will have to wait.
I am drooling. Cropps is similar. They had a one piece 2.3 meter wide table of two trees that had grown around on another in a twisting fashion. One was exceptionally figured bubinga and the other one was a dark brown walnuttish Color with purplish red highlights. You’re not allowed to take pics though. Because it’s their conference room and they don’t allow recording devices inside. The only way I was there is because I’m somewhat highly placed at the company I work at.
 
Last edited:
Back
Top