Starfruit donation block for WoodBarter community….

Thanks, Mark.
I have 6 reference sample blanks set aside on the drying rack. Do you want one of them when they are ready? Thought you could post a few pictures of the big block for Alan to see what kind of cut we could get for him.

The block I worked had a nice soft pink patina on the one side and blue stain on the one end -grain end. I took a 1/16th off on the jointer to true the pink face and a drab grey and tan was revealed. There was just a few specks of white in the wood, so guess like holly, this wood needs to be milled right away.

Figured I'd send to you since you are close and from there Ben, Fred, Chuck, Alan and the balance versus back and forth across the USA.

I did have a rip in there that could work for Ben as an undersized sample.
 
I have 6 reference sample blanks set aside on the drying rack. Do you want one of them when they are ready? Thought you could post a few pictures of the big block for Alan to see what kind of cut we could get for him.

The block I worked had a nice soft pink patina on the one side and blue stain on the one end -grain end. I took a 1/16th off on the jointer to true the pink face and a drab grey and tan was revealed. There was just a few specks of white in the wood, so guess like holly, this wood needs to be milled right away.

Figured I'd send to you since you are close and from there Ben, Fred, Chuck, Alan and the balance versus back and forth across the USA.

I did have a rip in there that could work for Ben as an undersized sample.
I would love a reference sample.

I'm not sure I'm following you on the rest of it though. Am i cutting everyone's piece out of the block you are sending or are some of those reference samples for people in the thread?
 
I would love a reference sample.

I'm not sure I'm following you on the rest of it though. Am i cutting everyone's piece out of the block you are sending or are some of those reference samples for people in the thread?
Sorry, I'll try again.

I cut 5 sample blanks and have them here on the porch drying. If you want one, I will set one aside for you to get later.

Ben wanted a sample. There is a thin in the box heading to you that might work. I don't have a camera in sync with our PC, so can't take and post pictures yet. Hoping you could take 1 or 2 of the thin and post for Ben.

Alan is hoping for a turning blank.

You, Ryan, take what you want and pass the rest along.

None are long enough for @SA-Motors but maybe 2 end to end could work for him.

Ryan, putting the ball in your court. Figured to minimize mailing time, we'd start east coast and work west. I waxed the end grain on all pieces accept the pen blanks.

As for cost to mail, I want nothing on my end. The holidays are here so trust you to find what works best for you and for those you may pass the wood onto.
 
Here is a Starfruit block I just got milled that I’m wanting to donate to the WB community for samples as I mentioned before. Just want shipping cost plus 10$ for the milling. Not sure who wants to be in charge of this. @Mr. Peet ? It still needs to be seasoned. It seems to turn pink as it dries. I’m thinking whoever is in charge of it can supply other members samples for their collections and just charge them a small fee to make up for whatever the shipping ends up being. Block is 28cmx17x13. I have another of about the same size if more is needed. If anyone wants to buy blocks, I can offer the set blocks for sale as well. Up to you guys. Thanks

View attachment 294779 View attachment 294780 View attachment 294781 View attachment 294782 View attachment 294783 View attachment 294784 View attachment 294785
Byron,

I have this as Averrhoa carambola, Starfruit / Carambola. Is this the 'Yang Tao' or 'Ma Fueng' variety?
 
I've taken a few slices for sample stock and re-boxed the rest. It will be posted it to Big Ry in the morning. There are a few blanks in there now, stopper stock, call blanks and pen blanks plus one of the original big blocks.

@Big Ry
Blanks at least 5 inches in size. Wet fine.
 
Sorry, I'll try again.

I cut 5 sample blanks and have them here on the porch drying. If you want one, I will set one aside for you to get later.

Ben wanted a sample. There is a thin in the box heading to you that might work. I don't have a camera in sync with our PC, so can't take and post pictures yet. Hoping you could take 1 or 2 of the thin and post for Ben.

Alan is hoping for a turning blank.

You, Ryan, take what you want and pass the rest along.

None are long enough for @SA-Motors but maybe 2 end to end could work for him.

Ryan, putting the ball in your court. Figured to minimize mailing time, we'd start east coast and work west. I waxed the end grain on all pieces accept the pen blanks.

As for cost to mail, I want nothing on my end. The holidays are here so trust you to find what works best for you and for those you may pass the wood onto.
Ok..i think i got it.

If anyone was in urgent need of this wood, it might be best to handle that with Mark right now before he mails it. I've had some unexpected family medical issues come up recently, so I'm having to spend a lot of time at my parents in Fredericksburg VA. I plan to come back to PA about once a week to see the wife and kids, and i can rough cut the wood relatively quickly while home. But due to these circumstances, it may take at least a week or two for me to process once i receive the wood from Mark.
 
Ok..i think i got it.

If anyone was in urgent need of this wood, it might be best to handle that with Mark right now before he mails it. I've had some unexpected family medical issues come up recently, so I'm having to spend a lot of time at my parents in Fredericksburg VA. I plan to come back to PA about once a week to see the wife and kids, and i can rough cut the wood relatively quickly while home. But due to these circumstances, it may take at least a week or two for me to process once i receive the wood from Mark.
I hope those medical issues resolve quickly and favorably! There's no urgency as far as I am concerned; the sample gets here when it gets here. Thank you in advance for handling all this.
 
I hope those medical issues resolve quickly and favorably! There's no urgency as far as I am concerned; the sample gets here when it gets here. Thank you in advance for handling all this.
Thanks. My mother's recovery isn't super quick, but it's at least predictable. My father's recovery is highly variable but will most likely be measured in months to years. So unfortunately I will be dealing with this for some time.
 
  • Thread Starter Thread Starter
  • #29
Byron,

I have this as Averrhoa carambola, Starfruit / Carambola. Is this the 'Yang Tao' or 'Ma Fueng' variety?
We call Starfruit Yangtao here, so I’m assuming that would be the one. In honesty, I didn’t realize there was a variety until you mentioned it. I recall the fruits on this tree as being smaller than the commercially available ones, but I’m not 100% if that would be a clear indication of variety.
 
Back
Top