It's bad enough that he actually did that on a compound angle and a cove, and made it work, then he's got to show off, and put that squiggly line of Walnut in there, and make it all work!!
TTTSNH, the pics I don't want Da Moma to see
- Thread starter Brink
- Start date
It's bad enough that he actually did that on a compound angle and a cove, and made it work, then he's got to show off, and put that squiggly line of Walnut in there, and make it all work!!
You're shining now...
- Thread Starter Thread Starter
- #43
Was finally able to finish the inlays.
Next up, cut the rest of the pins.
Next up, cut the rest of the pins.
Brink, that is beyond cool man! Tony
i used several expletives after a holy. nice work
- Thread Starter Thread Starter
- #46
Getting there
- Thread Starter Thread Starter
- #47
All four sides are done.
- Thread Starter Thread Starter
- #48
I had a nice, clear piece of oak. Left over from cutting a few boards for a friend yesterday.
Problem, it's too narrow. So I used a trick I just read about in a magazine.
First I ripped a diagonal cut.
After jointing the two edges, I moved the two halves to "widen" the board.
Then glue them together.
Problem, it's too narrow. So I used a trick I just read about in a magazine.
First I ripped a diagonal cut.
After jointing the two edges, I moved the two halves to "widen" the board.
Then glue them together.
Cool, never seen that one! Curious to see how the finished board looks. Tony
- Thread Starter Thread Starter
- #50
- Thread Starter Thread Starter
- #51
Hinges...
Hinges....
The yet to be top will need hinges....
I got something I will try
Hinges....
The yet to be top will need hinges....
I got something I will try
Very cool " trick " ... new one for me ... thanks
woodtickgreg
scroll, flat, spin
Staff member
Administrator
Global Moderator
Founding Member
Full Member
Forum Moderator
I'm interested huckelberry!
I don't know but you better hurry your monkey ass up, you started this project 2 months ago and don't have the lid attached yet, and you still got to build it, attach it, build however many trays, drawers, fold up walk in closets and whatever inside, then finish the box inside and out. And, you only got 30 days left before Mama Da Brink is gonna be expecting a box under the tree!!!! 
- Thread Starter Thread Starter
- #55
Started on the hinges.
more in this later.
more in this later.
- Thread Starter Thread Starter
- #56
Cut and smoothed the underside of the lid.
- Thread Starter Thread Starter
- #57
Back to the hinges...
woodtickgreg
scroll, flat, spin
Staff member
Administrator
Global Moderator
Founding Member
Full Member
Forum Moderator
Very cool my friend! I'm diggin it.
- Thread Starter Thread Starter
- #59
Busy shaping the lid
- Thread Starter Thread Starter
- #60
This is where I'm at
