• New Woodbarter Hats Are Available!!! Scroll down on the main page to the Member Activities & Site Support, Then click on Wood Barter SCHWAG and go to the topics on hats by Woodtickgreg to order your hat. There's only a limited quanity, so don't wait to get yours.

Two fun ones

chatometry

chatometry

Member
Full Member
Messages
750
Reaction score
1,338
Location
Italy
First name
Paolo
All I know about these is that they were kindly brought as gifts by my sister who collected them on Agusta island in Papua New Guinea.

After a glance at the first one my first thought is some sort of fig, and the bark makes sense too.

20251225_104427.webp
20251225_104513.webp
20251225_104520.webp

As for the second one, the bark has some lenticles and the cut shows quite some medullary rays. The little info I can find on the internet about that island talks about frangipani (plumeria), but where I am now there is a lot of plumeria and the bark looks totally different. So well I guess it could be one of Papua's billions of species...

20251225_104338.webp
20251225_104358.webp
20251225_104403.webp

Unfortunately I can't take better endgrain pics at the moment :(
 
chatometry said:
All I know about these is that they were kindly brought as gifts by my sister who collected them on Agusta island in Papua New Guinea.

After a glance at the first one my first thought is some sort of fig, and the bark makes sense too.

View attachment 282496
View attachment 282497
View attachment 282498

As for the second one, the bark has some lenticles and the cut shows quite some medullary rays. The little info I can find on the internet about that island talks about frangipani (plumeria), but where I am now there is a lot of plumeria and the bark looks totally different. So well I guess it could be one of Papua's billions of species...

View attachment 282493
View attachment 282494
View attachment 282495

Unfortunately I can't take better endgrain pics at the moment :(
Click to expand...
That’s a hard one. Especially now that Paul is gone.
 
chatometry said:
All I know about these is that they were kindly brought as gifts by my sister who collected them on Agusta island in Papua New Guinea.

After a glance at the first one my first thought is some sort of fig, and the bark makes sense too.

View attachment 282496
View attachment 282497
View attachment 282498

As for the second one, the bark has some lenticles and the cut shows quite some medullary rays. The little info I can find on the internet about that island talks about frangipani (plumeria), but where I am now there is a lot of plumeria and the bark looks totally different. So well I guess it could be one of Papua's billions of species...

View attachment 282493
View attachment 282494
View attachment 282495

Unfortunately I can't take better endgrain pics at the moment :(
Click to expand...
Strong rays in the second wood, maybe a Casuarina.?.
 
I bet there's trees in PNG that haven't been identified yet. I spent over 2 years there when I was working and our project was about 60km up stream on the Kikori River, right at the base of the highlands. It's an amazing place.
 
DLJeffs said:
I bet there's trees in PNG that haven't been identified yet. I spent over 2 years there when I was working and our project was about 60km up stream on the Kikori River, right at the base of the highlands. It's an amazing place.
Click to expand...
Do you have any pics of that area?
 
I have a ton photos on a separate drive. But here's a couple I have on this drive.
17ft rock python we removed off the runway so it didn't get injured. There's 7 guys each with two hands on this snake.
17 ft rock python.webp

Here's a couple of the local chiefs. We had a celebration when we had "first oil" - when you run the first crude oil down the pipes. The locals love to get all dressed up in the finest and dance. The women were all topless but I'm not sure I should post those here.
native chief3.webp

native dancer closeup.webp

native dancer.webp
 
DLJeffs said:
I have a ton photos on a separate drive. But here's a couple I have on this drive.
17ft rock python we removed off the runway so it didn't get injured. There's 7 guys each with two hands on this snake.
View attachment 283538

Here's a couple of the local chiefs. We had a celebration when we had "first oil" - when you run the first crude oil down the pipes. The locals love to get all dressed up in the finest and dance. The women were all topless but I'm not sure I should post those here.
View attachment 283539

View attachment 283540

View attachment 283541
Click to expand...
These are National Geographic pics! Any pics of the trees?
 
  • Thread Starter Thread Starter
  • #10
@DLJeffs nice pics! It must have been a cool experience. I would guess you were not into free wood collecting back then :D
 
It was a great experience. And you're correct, at that time I didn't do a lot of wood working. The birds and wild life got most my attention when not actually working
 
  • Thread Starter Thread Starter
  • #12
Mr. Peet said:
Strong rays in the second wood, maybe a Casuarina.?.
Click to expand...
I eventually got to cut that piece.
The face grain shows some nice flecks and quite some chatoyance:
20260523_230628.webp
This is a ½" endgrain:
20260523_213101 - Copia.webp
It doesn't match casuarina equisetifolia I saw on Paul's website:
Screenshot_20260524_090938_Chrome.webp

Anyway I found it very peculiar when cutting it: it caused my tungsten carbide tablesaw to burn through the wood, creating lots of smoke and charred black sawdust:

20260523_184254.webp

Nevertheless the wood surface came out as if there were no burn at all!!! This is quite unusual in my experience...
Any ideas?
 
chatometry said:
I eventually got to cut that piece.
The face grain shows some nice flecks and quite some chatoyance:
View attachment 288926
This is a ½" endgrain:
View attachment 288925
It doesn't match casuarina equisetifolia I saw on Paul's website:
View attachment 288927

Anyway I found it very peculiar when cutting it: it caused my tungsten carbide tablesaw to burn through the wood, creating lots of smoke and charred black sawdust:

View attachment 288928

Nevertheless the wood surface came out as if there were no burn at all!!! This is quite unusual in my experience...
Any ideas?
Click to expand...
Burning chainsaw oil?
 
Now you have to work the numbers, density, reaction to blacklight and so forth. Wood reminds me of Cardwellia sublimis, but I do not know the bark or the tree.
 
  • Thread Starter Thread Starter
  • #15
daniscool said:
Burning chainsaw oil?
Click to expand...
What do you mean? I used a tablesaw.

Mr. Peet said:
Now you have to work the numbers, density, reaction to blacklight and so forth.
Click to expand...
Will do, thanks! Cardwellia seems to me like a partial endgrain match.
My wood (I'll take better pics...):
20260523_213101 - Copia.webp

Cardwellia from hobbithouse (same scale)
Screenshot_20260524_145614_Chrome.webp

I also thought of rewarewa (knightia excelsa) but couldn't find many endgrain pics other than those on insidewood.
 
That last one does look like rewarewa from New Zealand. I have a cribbage board somewhere that we bought there and it's made from a bunch of different NZ timber.
 
chatometry said:
What do you mean? I used a tablesaw.


Will do, thanks! Cardwellia seems to me like a partial endgrain match.
My wood (I'll take better pics...):
View attachment 288939

Cardwellia from hobbithouse (same scale)
View attachment 288940

I also thought of rewarewa (knightia excelsa) but couldn't find many endgrain pics other than those on insidewood.
Click to expand...
Ahh. I thought chainsaw. That is slow of me.

Rewarewa is possible. I don’t have any anymore but the stuff I used was similar.
 
chatometry said:
What do you mean? I used a tablesaw.


Will do, thanks! Cardwellia seems to me like a partial endgrain match.
My wood (I'll take better pics...):
View attachment 288939

Cardwellia from hobbithouse (same scale)
View attachment 288940

I also thought of rewarewa (knightia excelsa) but couldn't find many endgrain pics other than those on insidewood.
Click to expand...
Rewarewa often has pores between the rays that look like big "U"s. Now I look at your's again, and see Cardwellia likely out as well.
 
  • Thread Starter Thread Starter
  • #20
For some reason I did not see this latest post :(
However, I collected more info about my second wood:
Density = 0.74 (46Lb/ft³)
No blacklight reaction:
20260610_212021.webp
A better endgrain (¼" by ¼"):
Cattura.webp

No idea about what it could be!
Paolo
 
You must log in or register to reply here.
Back
Top