1/2 or less
Walnut preferably Claro
Walnut preferably Claro
Walnut thins
- Thread starter Texasstate
- Start date
GrrrrHe's been collecting wood his whole life, about 300 years!
I will look. I have some harder than nails bees wing euc in thins. Some crotch mahogany and some very cool aussie blackwood
- Thread Starter Thread Starter
- #7
Can you put up pics
I will try to today- depends on how much it snows and how far I get cutting blanks
If Mike can’t help you I have a stack of thins in claro and a few with “marbled” bastogne grain.
I get these by the bundle so I think they’re mostly light figure pieces from guitars. They’re mostly 9” by 24+” or 5-6” by 32-36”. These are really thin though, 3/16 - 1/4”
Nice, sanded surface on most but not all are flat. I usually steam or ply them to deal with that. You need totally flat? I can pick through them if so.
I get these by the bundle so I think they’re mostly light figure pieces from guitars. They’re mostly 9” by 24+” or 5-6” by 32-36”. These are really thin though, 3/16 - 1/4”
Nice, sanded surface on most but not all are flat. I usually steam or ply them to deal with that. You need totally flat? I can pick through them if so.
- Thread Starter Thread Starter
- #10
Flatter the better ! Any between 1/2 and 1/4
That one on the ground with the tape on it is awesome looking
That one on the ground with the tape on it is awesome looking
I’ll pick through to find flat 1/4” ones then. A lot of these are 3/16 ...I used a lot the thicker ones because they are usually the flattest too.
Yeah, that one is the “bastogne” ...I quote because sometimes they’re bastogne and super hard wood. Sometimes they’re the splice between english and claro from orchard trees. Only a few of these scattered in.
Yeah, that one is the “bastogne” ...I quote because sometimes they’re bastogne and super hard wood. Sometimes they’re the splice between english and claro from orchard trees. Only a few of these scattered in.
I have 1/8", 3/16", 1/4", 3/8", and 1/2" in Walnut thin. Its Black Walnut though. Sanded clean. All dark wood. 2-9" widths. About any length.
- Thread Starter Thread Starter
- #13
Can you pm prices for the 3/8in?
Do you have any figured pieces in 1/4-3/8-1/2?
Do you have any figured pieces in 1/4-3/8-1/2?
I have crotch figured in 1/4 and 3/8". Lots of standard dark heartwood as well. PM sent.
Sorry Justin, but everything I have right now is a hair under 1/4”. Better bet is probably Mike or GVWP.
...if I buy another bundle of these I can put some of those thicker, marble grain ones aside and post here.
...if I buy another bundle of these I can put some of those thicker, marble grain ones aside and post here.