The wider the blade the more skill you need to reduce blood letting.. you get it down. My young sawmill guy does it with i think 190" 2 tpi 1.5 wide blades. Never seen any blood.
A Good Teacher Makes All Easy To Do
- Thread starter Asssiss
- Start date
- Thread Starter Thread Starter
- #22
I made all adjustes as Alex Snodgrass explained is his vídeo.
All tolerances using a feeler gauge...some tell use a business card or a Dollar bill folded...the bearing life will be clear for me when I start to use ....I hope next week.
youtube.com
I checked if an after market bearing kit is avaible to my machine for the future necessity....I can't find yet.
Thanks for comment
All tolerances using a feeler gauge...some tell use a business card or a Dollar bill folded...the bearing life will be clear for me when I start to use ....I hope next week.
- YouTube
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.
youtube.com
I checked if an after market bearing kit is avaible to my machine for the future necessity....I can't find yet.
Thanks for comment
Last edited:
- Thread Starter Thread Starter
- #23
Today I did the first cuts and liked a lot the machine itself and dust collection.
I am mounting the cyclone system.The bottle Idea is very nice.I did it for test but I am thinking in use a PVC pieces soon.
My last time using a bandsaw was 20 years ago...I need the learn curve again.
youtube.com
The dust is less than I expected.
youtube.com
I need more cuts to check how effective the system will be but the initial job was very good.
Checking the blade
Plastic bottles
One fits almost perfect
Using this for hose attachment
I am mounting the cyclone system.The bottle Idea is very nice.I did it for test but I am thinking in use a PVC pieces soon.
My last time using a bandsaw was 20 years ago...I need the learn curve again.
Makita LB 1200 F First Cuts
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.
youtube.com
The dust is less than I expected.
- YouTube
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.
youtube.com
I need more cuts to check how effective the system will be but the initial job was very good.
Checking the blade
Plastic bottles
One fits almost perfect
Using this for hose attachment
Last edited:
Genius! You create solutions!Today I did the first cuts and liked a lot the machine itself and dust collection.
I am mounting the cyclone system.The bottle Idea is very nice.I did it for test but I am thinking in use a PVC pieces soon.
My last time using a bandsaw was 20 years ago...I need the learn curve again.
Makita LB 1200 F First Cuts
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.
The dust is less than I expected.
- YouTube
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.
I need more cuts to check how effective the system will be but the initial job was very good.
Checking the blade
View attachment 287920
Plastic bottles
View attachment 287921
One fits almost perfect
View attachment 287922
Using this for hose attachment
View attachment 287923
View attachment 287924
View attachment 287925
View attachment 287926
- Thread Starter Thread Starter
- #25
In fact everything here is a copy of everyone idea where I add more or less improvements.
- Thread Starter Thread Starter
- #26
Hello folks...I am doing a final steps at my dust collector and after put the machine at final spot.
At my first cut I used the vac directly without use cyclone system.
Yesterday during final test the bucket was folded during test.
So because of too much negative pressure I take off the cap in front blade and now everything is ok.
Too much
youtube.com
Normal
youtube.com
At my first cut I used the vac directly without use cyclone system.
Yesterday during final test the bucket was folded during test.
So because of too much negative pressure I take off the cap in front blade and now everything is ok.
Too much
- YouTube
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.
youtube.com
Normal
- YouTube
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.
youtube.com
- Thread Starter Thread Starter
- #27
I am still working in my handle jig to cut some pieces.
In Brazil a wooden pallet (only one use they call here) cost $4US.
My friend wants to make a bench like these.
We choose six and I saved one for me.
They are super clean and brand new .From India.
To me the best are from Canada (nice pine) and US.Made in Europe are nice too but that block (no wood) I hate .
I use a car jack to help me take the wood free from nails. By hand or drill/impact driver.
Pallet bench:
youtube.com
youtube.com
I use one piece for make the guide of my bandsaw jig.
New and clean
Made in India
Original jack handle
Cut off
This small bolt permit hand or drill use.The wedge take the nail like one per time.The angle at jack base.The wood on top will be free.Invert the angle the wood below free.
This angle helps during process
Here the wood below beeing free
This guide permit for blades width
Just turn the wheel
I"ll add a lock soon
In Brazil a wooden pallet (only one use they call here) cost $4US.
My friend wants to make a bench like these.
We choose six and I saved one for me.
They are super clean and brand new .From India.
To me the best are from Canada (nice pine) and US.Made in Europe are nice too but that block (no wood) I hate .
I use a car jack to help me take the wood free from nails. By hand or drill/impact driver.
Pallet bench:
DIY | 4 pallets = 1 workbench ! #diy #workbench #asmr #pallet
4 palettes = 1 établi ✅ simple, rapide, économique et super solide 💪🛠️ Matériel :- 4 palettes Europe - 12 vis de 5x100mm et 20 vis de 4x35mm 🔩- 1 scie égo...
youtube.com
DIY workbench with 4 pallets ! #woodworking #diy #workbench
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.
youtube.com
I use one piece for make the guide of my bandsaw jig.
New and clean
Made in India
Original jack handle
Cut off
This small bolt permit hand or drill use.The wedge take the nail like one per time.The angle at jack base.The wood on top will be free.Invert the angle the wood below free.
This angle helps during process
Here the wood below beeing free
This guide permit for blades width
Just turn the wheel
I"ll add a lock soon
Last edited:
So innovative! Great videos!I am still working in my handle jig to cut some pieces.
In Brazil a wooden pallet (only one use they call here) cost $4US.
My friend wants to make a bench like these.
We choose six and I saved one for me.
They are super clean and brand new .From India.
To me the best are from Canada (nice pine) and US.Made in Europe are nice too but that block (no wood) I hate .
I use a car jack to help me take the wood free from nails. By hand or drill/impact driver.
Pallet bench:
DIY | 4 pallets = 1 workbench ! #diy #workbench #asmr #pallet
4 palettes = 1 établi ✅ simple, rapide, économique et super solide 💪🛠️ Matériel :- 4 palettes Europe - 12 vis de 5x100mm et 20 vis de 4x35mm 🔩- 1 scie égo...
DIY workbench with 4 pallets ! #woodworking #diy #workbench
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.
I use one piece for make the guide of my bandsaw jig.
New and clean
View attachment 288696
Made in India
View attachment 288697
Original jack handle
View attachment 288698
Cut off
View attachment 288699
This small bolt permit hand or drill use.The wedge take the nail like one per time.The angle at jack base.The wood on top will be free.Invert the angle the wood below free.
View attachment 288700
This angle helps during process
View attachment 288701
Here the wood below beeing free
View attachment 288702
This guide permit for blades width
View attachment 288703
Just turn the wheel
View attachment 288704
I"ll add a lock soon
View attachment 288705
