My boxes

Here is my latest box. I is made with figured Maple with a quilted Maple top panel. The dimensions are 8 1/4”x 7 1/4” x 2 3/8” tall over all. I t has a divided bottom with a lift off tray on top of the rails. The finish is Watco oil and buffed out with a hard wax. The hinges are Brusso stop hinges. IMG_3133.webp IMG_3134.webp IMG_3135.webp
 
GECKO said:
So I finally fished a box. I recently built a box to keep my Kleenex box from falling off the back of my bench into the hard to get to space behind.
Well my wife saw it and wanted one for her desk. This is that box. It is made from tiger striped Maple. The dimensions are 5 1/4” square by 6” tall. The lid on top fits on the tissue box. It was finished with a drying oil and buffed out with a hard wax. View attachment 291007View attachment 291009
Click to expand...
So practical! I need to make a couple of these! Such a great idea! Chuck
 
Here is my latest box. It has been in process for quite awhile as I really didn’t have a plan on the design. I finally finished this morning.
It is made from some high end Koa I collected over a course of years from a friend of mine who ran a mill in Kona.
The box dimensions are 7”x8”x4 1/4” tall.
It was finished with Watco oil and buffed out with a hard wax. IMG_3137.webp IMG_3138.webp IMG_3139.webp IMG_3141.webp IMG_3142.webp IMG_3145.webp IMG_3144.webp IMG_3143.webp IMG_3148.webp
 
GECKO said:
Here is my latest box. It has been in process for quite awhile as I really didn’t have a plan on the design. I finally finished this morning.
It is made from some high end Koa I collected over a course of years from a friend of mine who ran a mill in Kona.
The box dimensions are 7”x8”x4 1/4” tall.
It was finished with Watco oil and buffed out with a hard wax. View attachment 291164View attachment 291165View attachment 291166View attachment 291167View attachment 291168View attachment 291169View attachment 291170View attachment 291171View attachment 291172
Click to expand...
I drool.

Your wood might profit from slightly more sanding. Especially figured wood like this needs to be sanded properly to fully show its beauty. A few spots of tear out are visible.

It did take me a few minutes to notice because the wood is so damn gorgeous.
 
I appreciate your comment. The body was sanded up to something like 600 grit but there are some tear outs .Koa can be a bit brittle sometimes.
Once again I really appreciate your insights on my works. Please keep them comming.
 
GECKO said:
I appreciate your comment. The body was sanded up to something like 600 grit but there are some tear outs .Koa can be a bit brittle sometimes.
Once again I really appreciate your insights on my works. Please keep them comming.
Click to expand...
Yeah. Koa can do that. Especially when so highly figured. It might be time to get a small drum sander for situations like these. Or get an old infill smoother and use that. They can finish figured anything without any problems. Also leave a slightly better surface than sanding. The camber is important though. Otherwise you will get tracks.
 
Here is my next box. The wood species is unknown. The top section is 6X6x2 3/4” deep. The bottom section is 10x6x2”tall the drawer is 1” deep. Finished with Watco oil and hard wax IMG_3149.webp IMG_3150.webp IMG_3151.webp IMG_3152.webp
 
Here is my next box. I believe it is made from Sapele. The dimensions are 5 1/4”x5 1/4”x2 1/8” tall. The finish is multiple brushed on coats of shellac buffed out with 0000 steel wool and buffed out with dark wax. IMG_3177.webp IMG_3180.webp
 
GECKO said:
Here is my next box. I believe it is made from Sapele. The dimensions are 5 1/4”x5 1/4”x2 1/8” tall. The finish is multiple brushed on coats of shellac buffed out with 0000 steel wool and buffed out with dark wax. View attachment 291756View attachment 291757
Click to expand...
I like it a lot. Very understated. It doesn’t take control of your vision like some overly decorated projects can.
 
You must log in or register to reply here.
Back
Top