- Thread Starter Thread Starter
- #41
It takes a stain in interesting ways - with the softer areas holding lots of color and the hard grain holding very little.Yeah i think that's the big issue is that you can probably buy white ash at just about any hardwood supplier in the US. I'm not even sure if anyone will want to pay to ship them if i cut them. Maybe ill just take them. I'm not the biggest fan of open grain wood, but i can probably find a use.
I didn't want to get into selling boards individually, as it's too much volume. I already went through and paired everything up to be ~$50 value per pack. So the pack is what it is at this point. If you really don't want the maple (you won't use it and/or want to lower shipping costs), i can remove it but the estimated value of the pack would remain the same.It takes a stain in interesting ways - with the softer areas holding lots of color and the hard grain holding very little.
And I'll take the first pair, with the sycamore ( I think it's Pack #10). I've always wanted to make a box with that speckled look. And if it's easier / cheaper to cut that longer sycamore to the length of the maple and stack them that's fine with me. In fact, if you have a use for it, keep the maple and just mail the sycamore.
Put me down for #15. And you may cut the ash in half or thereabouts if it will make it easier to ship.BOARD PACKS #14 & #15
#14 (Board Pack)
Estimated Value: $50
Estimated Weight: 15lbs (wood only)
View attachment 294074
View attachment 294076
#15 (Board Pack)
Estimated Value: $45
Estimated Weight: 14lbs (wood only)
View attachment 294075
View attachment 294077
At this point none of the packs should be incuring any service charges due to size, so it should be good as is.Put me down for #15. And you may cut the ash in half or thereabouts if it will make it easier to ship.
Nothing is claimed until its claimed. Its been a few days and I have not heard from Dan about the Yellowheart, so its all yours. I also marked the other 2 as sold to you.Hey Ryan, I want to say thank you again for all the effort you’re putting in to sell Paul’s wood to support the grandchildren’s fund. You have even put in some of your own pieces as a generous gesture! I’ve been wanting to make a purchase to support the fund. I’d like to purchase #1 & #3 if still available (and #7 if @daniscool passes on it).
Also, I will take the maple board that is part of #10 if @DLJeffs decides to buy #10 but doesn't want the maple. I'll put in a contribution for it, and maybe you can hold onto it for me with the others for now until the sales are done?
I might buy one or two more as well :-).
Sorry Ryan, didn't mean to get this confusing. I'm easy and happy to let the purchase ride as you listed it and I'll figure out something to do with the maple. Or I'm happy to swap it out for something else if Steven ( @SA-Motors ) wants it. Or just pay the shipping and service fee for packaging up a single board. Make it easy on yourself. I'd love something reddish or orangish, doesn't have to be very big. And thanks for the description of sycamore - I'm a little familiar with it. I had a couple small blanks I stabilized and tried to make reel seat inserts from them but when I turned them all the little speckles disappeared because being round, the cross cut section was tiny.Nothing is claimed until its claimed. Its been a few days and I have not heard from Dan about the Yellowheart, so its all yours. I also marked the other 2 as sold to you.
Regarding the Maple in #10, I really do not want to get into the habit of breaking the packs up. They are already physically bundled together, and some are even packed up and ready to ship. I will make an exception this time if both you and @DLJeffs are in agreement and willing to pay to ship your respective pieces (more an issue for DLJeffs, since he would just be shipping 1 single board). The maple piece would fit well with the Yellowheart block, so I could just ship those two together instead of including it in our ongoing trade (I still need to respond to your latest DM BTW).
And if you look at it in a certain way, I practically have too much space in my house. I mean, I can still enter my shop and cross the floor to the scrollsaw and usually not trip over a stray board, so clearly I have unused space that could hold more wood! How about #17, if you please, kind sir!BOARD PACKS #16 & #17
#16 (Board Pack)
Estimated Value: $48
Estimated Weight: 14lbs (wood only)
View attachment 294089
View attachment 294091
#17 (Board Pack)
Estimated Value: $51
Estimated Weight: 14lbs (wood only)
View attachment 294090
View attachment 294092
If you'd prefer to only have the Sycamore, then it sounds like Steve is good to take the maple, and I'll split that pack this time. I'll DM both of you the revised weight and estimated value.Sorry Ryan, didn't mean to get this confusing. I'm easy and happy to let the purchase ride as you listed it and I'll figure out something to do with the maple. Or I'm happy to swap it out for something else if Steven ( @SA-Motors ) wants it. Or just pay the shipping and service fee for packaging up a single board. Make it easy on yourself. I'd love something reddish or orangish, doesn't have to be very big. And thanks for the description of sycamore - I'm a little familiar with it. I had a couple small blanks I stabilized and tried to make reel seat inserts from them but when I turned them all the little speckles disappeared because being round, the cross cut section was tiny.