How's your day been?

DLJeffs said:
Ah, but that's only half the puzzle. How are the threads in the oil pan itself?
Click to expand...
They are good thankfully. I think they are harder than the bolt was. They looked good and the new bolt threaded in very easy by fingers. Tightened up nice with a wrench. Hopefully I never have to replace the pan.
 
Went out riding on the dual sports with one of my scooter riding buddies. I always stop at this house for a photo, just love this house. It's gotta be a million dollar house easy. We rode dirt roads mostly, stopped for lunch and stopped to watch a combine harvesting soy beans, that was kinda cool.
20261008_123918.webp 20261008_123745.webp
 
woodtickgreg said:
Went out riding on the dual sports with one of my scooter riding buddies. I always stop at this house for a photo, just love this house. It's gotta be a million dollar house easy. We rode dirt roads mostly, stopped for lunch and stopped to watch a combine harvesting soy beans, that was kinda cool.
View attachment 294238View attachment 294239
Click to expand...
What a pleasant looking house & setting!
 
Mr. Peet said:
How cold was it? See you still have trees with green leaves there.
Click to expand...
Was chilly in the morning and warmed up into the 60s later in the day. Peak color around here will be in about another week, mid October. Haven't had a frost yet.
 
This has been a great day. Finally able to log on to WB this afternoon. Not sure what the probably has been but my niece stopped by and was finally able to resolve whatever the issue was.
 
We've had beautiful weather with highs in the low 80's and lows in the 50's. Only real sign of fall is the early sunset and a few of the tree species starting to turn. Had to run to town this afternoon, but spent a little time walking around at home making sure all the trees were fenced well against the deer (rubbing).

Only real (full) color is the white birch. That is a large red maple behind them with a pin oak to the left side.
PXL_20261009_225452456.webp


The silver maple is starting to color a little bit

PXL_20261009_225733956.webp

We are still at least 2 weeks from normal frost date and won't have "full" color until end of October.
 
Well a couple days ago my garage door opener quit working, I could hear the .rotor running but no workey.
Problem is my garage is packed with 10 lbs of stuff in a 5 lb bag.
I have to move all of this stuff to get to the opener.
20261017_123016.webp
Now i have access. It was just a roll pin that worked its way out of a plastic gear, i found the roll pin in the bottom of the cover and re installed it. Fixed!
20261017_134001.webp
I had to pull all of this hardwood off the rack to get to the opener. Only part of it went back inside. I didnt keep anything less than 1 1/2" thick.
20261017_134047.webp
This will all get cut up for the fire pit.
20261017_162842.webp
I'm done, back is toast, that was a lot for a fat old man.
 
woodtickgreg said:
Well a couple days ago my garage door opener quit working, I could hear the .rotor running but no workey.
Problem is my garage is packed with 10 lbs of stuff in a 5 lb bag.
I have to move all of this stuff to get to the opener.
View attachment 294485
Now i have access. It was just a roll pin that worked its way out of a plastic gear, i found the roll pin in the bottom of the cover and re installed it. Fixed!
View attachment 294486
I had to pull all of this hardwood off the rack to get to the opener. Only part of it went back inside. I didnt keep anything less than 1 1/2" thick.
View attachment 294487
This will all get cut up for the fire pit.
View attachment 294488
I'm done, back is toast, that was a lot for a fat old man.
Click to expand...
Did you dab the pin with a touch of glue or drip of lock-tite to help keep it in place?
 
Mr. Peet said:
Did you dab the pin with a touch of glue or drip of lock-tite to help keep it in place?
Click to expand...
No I didn't, didn't think of it at the time and I had myself wedged in the wood rack under the opener and I really didn't want to get back down again. But I will say it took a few pretty good wacks with a hammer and punch to get it driven in. It held for 12 years, I hope it holds as long this time, lol.
 
woodtickgreg said:
Well a couple days ago my garage door opener quit working, I could hear the .rotor running but no workey.
Problem is my garage is packed with 10 lbs of stuff in a 5 lb bag.
I have to move all of this stuff to get to the opener.
View attachment 294485
Now i have access. It was just a roll pin that worked its way out of a plastic gear, i found the roll pin in the bottom of the cover and re installed it. Fixed!
View attachment 294486
I had to pull all of this hardwood off the rack to get to the opener. Only part of it went back inside. I didnt keep anything less than 1 1/2" thick.
View attachment 294487
This will all get cut up for the fire pit.
View attachment 294488
I'm done, back is toast, that was a lot for a fat old man.
Click to expand...
then i must have 80 lbs of stuff in my 5 lb garage
 
You must log in or register to reply here.
Back
Top