That is a beautiful bench! Is it a bit top heavy, though? Chuck
Workbench Build
- Thread starter Sprung
- Start date
- Thread Starter Thread Starter
- #63
While it is heavier at the top, it isn't what I would consider top heavy. It's very stable. Many, many workbenches are built in similar manner - with a big, thick, heavy top. The legs on this are stout, and the stretchers are good sized as well. There are also no large overhangs that could yield near enough leverage to tip the bench if you put something heavy on an edge or end. So, yes, most of the weight is up top, but it's not top heavy in the way you would think of top heavy - tippy or unstable. If I build a cabinet to go under the bench, the cabinet, filled with tools, would add more weight down lower.
Absolutely phenomenal bench Matt. Will that first scratch or ding bum you out - like a new truck?
- Thread Starter Thread Starter
- #65
It might, but I'll get over it, lol. I'm really looking forward to having a good bench to work at.
Beautiful work, Matt! Thanks for sharing the build with us!
woodtickgreg
scroll, flat, spin
Staff member
Administrator
Global Moderator
Founding Member
Full Member
Forum Moderator
How did you get in my head and steal my vision? 
That's pretty much what I want to do when I build mine. Only thing I might do different is add a tool tray, but that's not etched in stone yet, or should I say etched in ash. Bench looks great Matt! Well done sir.
That's pretty much what I want to do when I build mine. Only thing I might do different is add a tool tray, but that's not etched in stone yet, or should I say etched in ash. Bench looks great Matt! Well done sir.
Missed this until just now! That is too cool. Love the puck feet. Soooo...... immensely superior to my pickup tailgate
- Thread Starter Thread Starter
- #70
Well, the finish has had some time to cure. Today I had someone help me move it into place. I levelled it and mounted the vise.
And dog holes will probably happen sooner, rather than later. I ordered a 3/4" Wood Owl bit - which I've seen some recommend for drilling dog holes - and a guide bushing that I'll use in a jig I'll build to give me precise hole placement - and with the guide bushing the holes will be straight, not at an angle.
I ran the bit through a scrap piece to test how it drilled. It drilled fast - and with virtually no tear out. This is the back side of the hole. What's nice is that I won't need to use a backer board under the top when I drill out the dog holes.
And dog holes will probably happen sooner, rather than later. I ordered a 3/4" Wood Owl bit - which I've seen some recommend for drilling dog holes - and a guide bushing that I'll use in a jig I'll build to give me precise hole placement - and with the guide bushing the holes will be straight, not at an angle.
I ran the bit through a scrap piece to test how it drilled. It drilled fast - and with virtually no tear out. This is the back side of the hole. What's nice is that I won't need to use a backer board under the top when I drill out the dog holes.
woodtickgreg
scroll, flat, spin
Staff member
Administrator
Global Moderator
Founding Member
Full Member
Forum Moderator
Never heard of that bit, interesting.
- Thread Starter Thread Starter
- #72
I remember reading some time ago of people using a special bit to drill dog holes, so I went searching and found mentions of that one. At $20 it wasn't the cheapest drill bit I've ever bought, but I've used enough cheap drill bits to realize that sometimes it's worth it to buy a better bit.
I will probably drill a few more test holes before I use it on the bench, but I was very pleased with it on the one test hole thus far.
I will probably drill a few more test holes before I use it on the bench, but I was very pleased with it on the one test hole thus far.
Will you please post pictures of your jig also? I don’t think I have ever drilled a straight hole except maybe on the lathe......
- Thread Starter Thread Starter
- #74
Yup! Will do so whenever I build/use it. This will be a purpose built jig built specifically to drill the dog holes. Anything that needs a good/straight hole usually gets drilled on the drill press or, occasionally, the lathe. That's not an option with this!
For an auger bit, that sure made a clean exit. Impressed. Drilling holes in a bench top like this reminded me of an incident happened in the wood shop in high school. They got some new benches and Mr. Holloway, the other shop teacher besides my Dad, was drilling the holes to install the vices. He was using a big 3/4" drive drill motor, the kind with two handles sticking out from the sides. He accidentally hit one of the steel braces that ran along the underside of the bench. The drill bit stopped, the motor kept spinning. The cord wrapped around Mr. Holloway's wrist snapping the bones.
- Thread Starter Thread Starter
- #76
I was looking for another thread and noticed that it's been a year since I "finished" the bench. Well, it's technically not done yet. I haven't done anything on the bench either. The vise still needs a handle. The lower part still needs a shelf. Dog holes still need to be drilled.
So, yeah, maybe I'll finish it this year?
At least I've used it some, though nowhere near as much as I'd planned or liked to have.
So, yeah, maybe I'll finish it this year?
At least I've used it some, though nowhere near as much as I'd planned or liked to have.
Nicely done. Have you thought about maybe two ½ height cabinets with an inset lower frame to hold them inside rails that could then be removed quickly to facilitate moving the bench with only normal people helping? This would automatically create a shelf from the cabinet tops. That way you could have dust free storage and a shelf you could reach without needing to get down in the floor.
- Thread Starter Thread Starter
- #78
Yeah, a small cabinet in there is the eventual plan. But I've got some projects for our home that I need to get to working on before I get into a project like that. We moved here two years ago and much time was spent getting the shop set up here, so I owe it to my family to tackle some of the projects for them before I do too much more in the way of shop projects.
Understand. I have been on this house for 4 years and have plenty left to do. But as a carpenter, I will never quite be done...